Input and Output Speed Sensor Installation

Fig 1: Identifying Speed Sensor Harness Assembly, Speed Sensors And Speed Sensor Bolts

Courtesy of SUZUKI OF AMERICA CORP.

CAUTION: Use care when installing the speed sensors or damage may occur to the speed sensors or the transaxle case.

Install NEW speed sensor O-rings (63).
Install the output speed sensor (62) and the input speed sensor (73).
CAUTION: Refer to FASTENER NOTICE .
Install the M6 x 1.0 x 16 mm speed sensor bolts (61).
Tightening torque

Tighten the speed sensor bolts (61) to 5 N.m (44 lb in).
Connect the input and output speed sensor harness assembly (71) to the speed sensors and the TCM.
Reference: TRANSMISSION FLUID DRAIN PLUG INSTALLATION