Removal Procedure

NOTE: Place the transaxle in neutral (N).

Remove the transmission wiring harness. Refer to AUTOMATIC TRANSMISSION WIRING HARNESS REPLACEMENT .

Fig 1: Identifying Control Valve Body Bolts, Control Valve Body Fluid Passage Cover And Gasket
Courtesy of SUZUKI OF AMERICA CORP.
Remove the 2 control valve body bolts/screws (31), control valve body fluid passage cover (37) and gasket (38).

Fig 2: Identifying Control Valve Body Mounting Bolts
Courtesy of SUZUKI OF AMERICA CORP.
Remove the 6 control valve body mounting bolts/screws (1-6).

Fig 3: Disconnecting Manual Shift Detent Lever Assembly From Manual Valve Link
Courtesy of SUZUKI OF AMERICA CORP.
While holding the control valve body assembly, disconnect the manual shift detent lever assembly (710) from the manual valve link (336).
Move the detent lever assembly clockwise for ease of removing the manual valve.
Remove the control valve body assembly (39).

Fig 4: Identifying Transaxle Case Fluid Passage Seals
Courtesy of SUZUKI OF AMERICA CORP.
Remove the 2 transaxle case fluid passage seals (86).