LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2008 >> XL7 Premium, AWD >> Repair and Diagnosis >> Electrical >> Charging Systems >> Diagnostic Information and Procedures >> DTC P0626 >> Circuit/System Testing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Testing

  1. Ignition OFF, disconnect the harness connector at the generator.
  2. Ignition ON, engine OFF, observe the scan tool ECM GEN-F Terminal Signal parameter. It should display less than 10 percent.
    • If the GEN-F Terminal Signal parameter was not affected by the disconnected generator harness, test the GEN-F Terminal Signal circuit terminal 2 for a short to voltage. If the circuit tests normal, replace the ECM.
    • If the circuit tested normal and the ECM parameter changed from above 65 percent to less than 10 percent, replace the generator.
scientia non olet · About LEMON Manuals