LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2008 >> XL7 Limited, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine General Information And Diagnosis >> Diagnostic Information and Procedures >> DTC P0627, P0628, or P0629 >> Circuit/System Testing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Testing

  1. Ignition OFF, disconnect the fuel pump relay.
  2. Connect a test lamp between the control circuit of the fuel pump relay and ground.
  3. Ignition ON, command the fuel pump ON and OFF with a scan tool. The test lamp should turn ON and OFF as commanded.
    • If the test lamp remains OFF all the time, test for a short to ground or an open/high resistance on the control circuit. If circuit/connections test normal, replace the ECM.
    • If the test lamp remains ON all the time, test for a short to voltage on the control circuit. If circuit/connections test normal, replace the ECM.
  4. Ignition OFF, connect a test lamp between the fuel pump relay control circuit and the ground circuit of the fuel pump relay.
  5. Ignition ON, command the fuel pump ON and OFF with a scan tool. The test lamp should turn ON and OFF as commanded.
    • If the test lamp does not turn ON when commanded, repair the open/high resistance in ground circuit of the fuel pump relay.
  6. Ignition ON, test for 2-3 volts on the control circuit of the fuel pump relay.
    • If the voltage is not within the specified range, replace the ECM.
  7. If all circuits/connections test normal, test or replace the fuel pump relay.
scientia non olet · About LEMON Manuals