LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2008 >> XL7 Limited, AWD >> Repair and Diagnosis >> Engine Mechanical >> Engine Exhaust System >> Repair Instructions. >> Catalytic Converter Heat Shield Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

Fig 1: Identifying Catalytic Converter Heat Shield
G05469292Courtesy of SUZUKI OF AMERICA CORP.
  1. Position the catalytic converter heat shield, and insert the catalytic converter heat shield between the underbody and the dash panel heat shield.
  2. Install the NEW rivets.
    Fig 2: Identifying Fuel Tank Strap Bolt
    G05469293Courtesy of SUZUKI OF AMERICA CORP.
    CAUTION: Refer to FASTENER NOTICE .
  3. Install the fuel tank strap bolt.

    Tightening torque 

    Tighten the bolt to 25 N.m (18 lb ft). 

  4. Install the muffler assembly. Refer to MUFFLER REPLACEMENT .
scientia non olet · About LEMON Manuals