Fastener Tightening Specifications - Automatic Transaxle - AF33-5
FASTENER TIGHTENING SPECIFICATIONS
| Description of Usage | Ref No.* | Qty | Size | Specification | |
|---|---|---|---|---|---|
| Metric | English | ||||
| Automatic Transmission Fluid Pump (2) to Transmission Case Assembly (17) | 5 | 8 | M8 x 1.25 x 28 mm | 25 N.m | 18 lb ft |
| Battery Negative Cable and Wire Harness Ground to Transaxle Stud Nut | - | - | - | 45 N.m | 33 lb ft |
| Control Valve Body Cover (29) to Transmission Case Assembly (17) | 28 | 9 | M8 x 1.25 x 15.5 mm | 13 N.m | 10 lb ft |
| Control Valve Body Fluid Passage Cover (37) to Control Valve Body (39) | 30 | 2 | M6 x 1.0 x 55 mm | 10 N.m | 89 lb in |
| Fluid Baffle (803) to Torque Converter Housing Assembly (801) | 807 | 3 | M6 x 1.0 x 14 mm | 5 N.m | 44 lb in |
| Fluid Baffle (803) to Transmission Case Assembly (17) | 45 | 3 | M6 x 1.0 x 14.7 mm | 5 N.m | 44 lb in |
| Fluid Baffle (830) to Transmission Case Assembly (17) | 829 | 2 | M6 x 1.0 x 12 mm | 5 N.m | 44 lb in |
| Fluid Filter (42) to Transmission Case (17) | 43 | 1 | M6 x 1.0 x 16.7 mm | 5 N.m | 44 lb in |
| Fluid Level Indicator Bolt | 825 | 1 | M8 x 1.25 x 25 mm | 10 N.m | 89 lb in |
| Fluid Pump Body (202) to Fluid Pump Stator Shaft Assembly (208) | 231 | 13 | M6 x 1.0 x 14.5 mm | 12 N.m | 106 lb in |
| Fluid Pump Body (202) to Fluid Pump Stator Shaft Assembly (208) | 232 | 1 | M5 x 0.8 x 17 mm | 7 N.m | 62 lb in |
| Fluid Temperature Sensor Clip (49) to Control Valve Body (39) | 31 | 1 | M6 x 1.0 x 50 mm | 10 N.m | 89 lb in |
| Forward Clutch Accumulator Cover (616) to Case Cover (606) | 617 | 2 | M6 x 1.0 x 14.5 mm | 10 N.m | 89 lb in |
| Front Transaxle Mount (2) and Transaxle Bolts | - | - | - | 90 N.m | 66 lb ft |
| Fuel Line Retaining Clip Nut | - | - | - | 25 N.m | 18 lb in |
| Lower 4 Transaxle to Engine Bolts | - | - | - | 75 N.m | 55 lb ft |
| Lube Fluid Pipe Retainer (805) to Torque Converter Housing (801) | 806 | 1 | M6 x 1.0 x 14 mm | 5 N.m | 44 lb in |
| Lube Fluid Pipe Retainer (84) to Transmission Case Assembly (17) | 83 | 1 | M6 x 1.0 x 19.5 mm | 5 N.m | 44 lb in |
| Manual Shift Detent Spring (711) to Transmission Case (707) | 712 | 1 | M6 x 1.0 x 14 mm | 5 N.m | 44 lb in |
| Park Pawl Actuator Bracket (708) to Transmission Case Assembly (17) | 715 | 1 | M6 x 1.0 x 16.7 mm | 10 N.m | 89 lb in |
| Park Pawl Bolt/Screw (706) to Transmission Case Assembly (17) | 706 | 1 | M6 x 1.0 x 25 mm | 10 N.m | 89 lb in |
| Rear Valve Body Cover Plate Bolt - Hexagon | 416 | 2 | M5 x 0.8 x 13 mm | 7 N.m | 62 lb in |
| Rear Valve Body Cover Plate Bolt - Hexagon | 421 | 7 | M5 x 0.8 x 13 mm | 7 N.m | 62 lb in |
| Securing the Battery Negative Cable and Wire Harness Ground to Transaxle Stud | - | - | - | 45 N.m | 33 lb ft |
| Shift Control Knob Screw | - | - | - | 1.5 N.m | 13 lb in |
| Shift Control Nuts | - | - | - | 25 N.m | 18 lb ft |
| Speed Sensor (73) to Transmission Case Assembly (17) | 61 | 2 | M6 x 1.0 x 16 mm | 5 N.m | 44 lb in |
| Stabilizer Link Nuts | - | - | - | 65 N.m | 48 lb ft |
| Torque Converter Housing (10) to Transmission Case Assembly (17) | 3 | 1 | M8 x 1.25 x 30 mm | 29 N.m | 21 lb ft |
| Torque Converter Housing (10) to Transmission Case Assembly (17) | 4 | 12 | M8 x 1.25 x 30 mm | 29 N.m | 21 lb ft |
| Torque Converter Housing (10) to Transmission Case Assembly (17) | 6 | 2 | M8 x 1.25 x 35 mm | 29 N.m | 21 lb ft |
| Torque Converter Housing (10) to Transmission Case Assembly (17) | 7 | 1 | M8 x 1.25 x 45 mm | 29 N.m | 21 lb ft |
| Torque Converter Housing (10) to Transmission Case Assembly (17) - TORX | 8 | 1 | M8 x 1.25 x 30 mm | 29 N.m | 21 lb ft |
| Torque Converter to Flywheel Bolts | - | - | - | 60 N.m | 44 lb ft |
| Transaxle Brace Bolts | - | - | - | 50 N.m | 37 lb ft |
| Transaxle Control Bracket Nuts | - | - | - | 25 N.m | 18 lb ft |
| Transaxle Front Mount Bolts | - | - | - | 90 N.m | 66 lb ft |
| Transaxle Left Mount Nuts | - | - | - | 37 N.m | 27 lb ft |
| Transaxle Mount to Bracket Bolts | - | - | - | 55 N.m | 41 lb ft |
| Transaxle Mount to Bracket Bolts | - | - | - | 37 N.m | 27 lb ft |
| Transaxle Mount to Bracket Nuts | - | - | - | 37 N.m | 27 lb ft |
| Transaxle Oil Cooler Line Assembly Nut at the Transaxle | - | - | - | 9 N.m | 80 lb in |
| Transaxle Range Selector Lever Nut | - | - | - | 16 N.m | 12 lb ft |
| Transaxle Rear Mount Bracket Bolts | - | - | - | 55 N.m | 41 lb ft |
| Transaxle Rear Mount Bracket Bolts | - | - | - | 37 N.m | 27 lb ft |
| Transaxle Shift Control Cable Bracket Bolts | - | - | - | 25 N.m | 18 lb ft |
| Transaxle to Engine Bolts | - | - | - | 75 N.m | 55 lb ft |
| Transmission Case Cover (606) to Transmission Case Assembly (17) | 74 | 1 | M8 x 12.5 x 30 mm M6 x 1.0 x 10 mm |
25 N.m | 18 lb ft |
| Transmission Case Cover (606) to Transmission Case Assembly (17) | 77 | 1 | M8 x 1.25 x 72 mm | 25 N.m | 18 lb ft |
| Transmission Case Cover (606) to Transmission Case Assembly (17) | 20 | 8 | M8 x 1.25 x 30 mm | 25 N.m | 18 lb ft |
| Transmission Case Cover (606) to Transmission Case Assembly (17) | 21 | 1 | M8 x 1.25 x 48 mm | 25 N.m | 18 lb ft |
| Transmission Case Cover (606) to Transmission Case Assembly (17) | 22 | 2 | M8 x 1.25 x 45 mm | 25 N.m | 18 lb ft |
| Transmission Case Fluid Passage Cover (40) to Transmission Case Assembly (17) | 41 | 2 | M6 x 1.0 x 14 mm | 5 N.m | 44 lb in |
| Transmission Control Module (TCM) Bolts | 76 | 3 | M6 x 1.0 x 16 mm | 25 N.m | 18 lb ft |
| Transmission Fluid Drain Plug (819) to Torque Converter Housing (801) | 819 | 1 | M18 x 12 mm | 39 N.m | 29 lb ft |
| Transmission Fluid Pressure Test Hole Plug | 66 | 9 | - | 7 N.m | 62 lb in |
| Transmission Front Mount Thru Bolt | - | - | - | 110 N.m | 81 lb ft |
| Transmission Left Mount Bracket Bolts | - | - | - | 55 N.m | 41 lb ft |
| Transmission Mount Bracket Bolts | - | - | - | 55 N.m | 41 lb ft |
| Transmission Mount to Bracket Thru Bolt | - | - | - | 110 N.m | 81 lb ft |
| Transmission Mount to Frame Bolts | - | - | - | 50 N.m | 37 lb ft |
| Transmission Rear Mount Bolts | - | - | - | 50 N.m | 37 lb ft |
| Transmission Rear Mount Thru Bolts | - | - | - | 110 N.m | 81 lb ft |
| Upper 4 Transaxle to Engine Bolts | - | - | - | 75 N.m | 557 lb ft |
| 3rd Gear Band Anchor Bolt (64) to Transmission Case Assembly (17) | 64 | 1 | M20 x 1.5 x 21 mm | 167 N.m | 123 lb ft |
| 3rd Gear Band Apply Tube Retainer (51) to Transmission Case Assembly (17) | 50 | 2 | M6 x 1.0 x 14 mm | 5 N.m | 44 lb in |
| 4-5 Clutch Apply Pipe Retainer (610) to Transmission Case Cover (606) | 611 | 4 | M5 x 0.8 x 12 mm | 7 N.m | 62 lb in |
| Valve Body | |||||
| Control Valve Body (39) to Transmission Case Assembly (17) | 34 | 2 | M6 x 1.0 x 16 mm | 10 N.m | 89 lb in |
| Control Valve Body (39) to Transmission Case Assembly (17) | 35 | 2 | M6 x 1.0 x 50 mm | 10 N.m | 89 lb in |
| Control Valve Body (39) to Transmission Case Assembly (17) | 47 | 3 | M6 x 1.0 x 55 mm | 10 N.m | 89 lb in |
| Control Solenoid Valve Retainer (312) to Control Valve Body (39) | 311 | 1 | M5 x 0.8 x 13 mm | 7 N.m | 62 lb in |
| Front Control Valve Body (315) to Middle Control Valve Body (323) | 313 | 5 | M5 x 0.8 x 20 mm | 7 N.m | 62 lb in |
| Front Control Valve Body (315) to Middle Control Valve Body (323) | 314 | 2 | M5 x 0.8 x 16 mm | 7 N.m | 62 lb in |
| Front Control Valve Body (315) to No. 2 Rear Control Valve Body (330) | 331 | 1 | M5 x 0.8 x 76 mm | 7 N.m | 62 lb in |
| Front Control Valve Body (315) to No. 2 Rear Control Valve Body (330) | 332 | 4 | M5 x 0.8 x 49.5 mm | 7 N.m | 62 lb in |
| Lock Up Control Solenoid Valve (339) to Front Control Valve Body (315) | 307 | 1 | M5 x 0.8 x 10 mm | 7 N.m | 62 lb in |
| Middle Control Valve Body (323) Pressure Tap | 334 | 1 | M6 x 1.0 x 12 mm | 7 N.m | 62 lb in |
| Middle Control Valve Body (323) to No. 2 Rear Control Valve Body (330) | 304 | 1 | M5 x 0.8 x 50 mm | 7 N.m | 62 lb in |
| No. 2 Rear Control Valve Body (330) to Front Control Valve Body (315) | 304 | 1 | M5 x 0.8 x 50 mm | 7 N.m | 62 lb in |
| Rear Control Valve Body (326) to Middle Control Valve Body (323) | 333 | 1 | M5 x 0.8 x 40 mm | 7 N.m | 62 lb in |
| Rear Control Valve Body (326) to Middle Control Valve Body (323) | 335 | 2 | M5 x 0.8 x 35 mm | 7 N.m | 62 lb in |
| Reverse, 1st Shift Solenoid Valve - S1 (310) to Control Valve Body (39) | 302 | 1 | M5 x 0.8 x 28 mm | 7 N.m | 62 lb in |
| Reverse Shift Solenoid Valve - S5 (305) to Control Valve Body (39) | 302 | 1 | M5 x 0.8 x 28 mm | 7 N.m | 62 lb in |
| 1-2, 2-3, Reverse, Shift Solenoid Valve - S3 (300) to Control Valve Body (39) | 301 | 1 | M5 x 0.8 x 62 mm | 7 N.m | 62 lb in |
| 2-3, 3-4 Shift Solenoid Valve - S2 (308) to Control Valve Body (39) | 307 | 1 | M5 x 0.8 x 10 mm | 7 N.m | 62 lb in |
| 3-4, 4-5 Shift Solenoid Valve - S4 (303) to Control Valve Body (39) | 302 | 1 | M5 x 0.8 x 28 mm | 7 N.m | 62 lb in |