Installation Procedure

Fig 1: Identifying Transaxle Case Fluid Passage Seals

Courtesy of SUZUKI OF AMERICA CORP.

Install 2 new transaxle case fluid passage seals (86) into the transaxle case fluid ports.

Fig 2: Connecting Manual Valve Link To Manual Shift Detent Lever Assembly
Courtesy of SUZUKI OF AMERICA CORP.
While holding the control valve body assembly (39), connect the manual valve link (336) to the manual shift detent lever assembly (710).

Fig 3: Identifying Control Valve Body Assembly To Transaxle Case Bolts
Courtesy of SUZUKI OF AMERICA CORP.
Install the 6 control valve body assembly to transaxle case bolts and hand tighten.

Fig 4: Identifying Tightening Sequence Of Control Valve Body Assembly To Transaxle Case Bolts
Courtesy of SUZUKI OF AMERICA CORP.

CAUTION: Refer to FASTENER NOTICE .
Tighten the control valve body assembly-to-transaxle case bolts in sequence.
Tightening torque

Tighten the bolts to 10 N.m (89 lb in).

Fig 5: Identifying Control Valve Body Fluid Passage Cover And Control Valve Body Bolts
Courtesy of SUZUKI OF AMERICA CORP.
Install a new control valve body fluid passage cover gasket (38).
Install the control valve body fluid passage cover (37).
Install the 2 control valve body bolts (31).
Tightening torque

Tighten the bolt to 10 N.m (89 lb in).
Install the transmission wiring harness. Refer to AUTOMATIC TRANSMISSION WIRING HARNESS REPLACEMENT .
After the transmission is reassembled and filled with fluid perform the transmission adaptive learn procedure. Refer to TRANSMISSION ADAPTIVE LEARN AND TRANSMISSION NEUTRAL LEARN .