LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2008 >> XL7 Base, FWD >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Heating, Ventilation And A/C >> Repair Instructions >> Auxiliary Blower Control Module Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Auxiliary Blower Control Module Replacement

Fig 1: Identifying Auxiliary Blower Control Module And Screws
G05470619Courtesy of SUZUKI OF AMERICA CORP.
COMPONENT NAME CHART

Callout Component Name
Preliminary Procedure 
  1. Remove the left rear trim panel. Refer to REAR QUARTER LOWER TRIM PANEL REPLACEMENT .
  2. Remove the 3 auxiliary HVAC module mounting bolts. Refer to AUXILIARY HVAC MODULE REPLACEMENT .
  3. Reposition the auxiliary HVAC module inward to gain access to the blower control module.
  4. Disconnect the electrical connection.
1 Blower Control Module Screw (Qty: 2).
CAUTION: Refer to FASTENER NOTICE .

Tightening torque 
1.5 N.m (13 lb in) 
2 Blower Control Module
Tip:  The blower control module is mounted on the outboard side of the module.
scientia non olet · About LEMON Manuals