LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2008 >> XL7 Base, FWD >> Repair and Diagnosis >> Engine Mechanical >> Engine Exhaust System >> Repair Instructions. >> Exhaust Heat Shield Replacement - Dash Panel >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

Fig 1: Identifying Dash Panel Heat Shield Nut
G05469295Courtesy of SUZUKI OF AMERICA CORP.
  1. Position the dash panel heat shield to the underbody, installing the shield over the stud.
    CAUTION: Refer to FASTENER NOTICE .
  2. Install the dash panel heat shield nut.

    Tightening torque 

    Tighten the nut to 10 N.m (89 lb in). 

  3. Install NEW rivets.
  4. Lower the vehicle.
scientia non olet · About LEMON Manuals