Removal Procedure

Fig 1: Identifying Powertrain Control Module And Battery Box Cover

Courtesy of SUZUKI OF AMERICA CORP.

Remove the powertrain control module (PCM) (2) from the battery box cover (1) and relocate to the side.

Fig 2: Removing Battery Box Lid
Courtesy of SUZUKI OF AMERICA CORP.
Release the locking tab (1) on the side of the battery box.
Release the alignment tabs (2) on the front of the battery box.
Remove the battery box lid (3).

Fig 3: Identifying Positive And Negative Battery Cables
Courtesy of SUZUKI OF AMERICA CORP.
Disconnect the positive and negative battery cables. Refer to BATTERY NEGATIVE CABLE DISCONNECTION AND CONNECTION .

Fig 4: Identifying Battery, Battery Hold Down And Washer
Courtesy of SUZUKI OF AMERICA CORP.
Remove the battery hold down bolt (5), battery hold down (4), and washer (3).
Remove the battery (1).