Circuit/System Testing
- Ignition OFF, disconnect the harness connector at the rear wiper motor.
- Verify that DTC B1448 remains current.
- If DTC B1448 changed to history, test or replace the rear wiper motor.
- Ignition OFF, disconnect the X5 harness connector at the BCM.
- Test for greater than 70 ohms of resistance between the BCM accessory voltage circuit terminal 14 and ground.
- If less than the specified range, test the circuit for a short to ground. If the circuit tests normal, test or replace the underhood fuse block.
- If the circuit tests normal, test or replace the BCM.