Installation Procedure
- With the aid of an assistant, position the new sunroof module into the roof opening.
- Install the bolts which secure the sunroof module to the roof and tighten the bolts by hand.
- Place a 12 mm (0.47 in) pin into the sunroof module alignment holes.CAUTION: Refer to FASTENER NOTICE .
- Remove the alignment pins.
Tightening torque
Tighten the bolts to 8 N.m (70 lb in).
- Install the front and rear sunroof drain hoses. Refer to SUNROOF HOUSING FRONT DRAIN HOSE REPLACEMENT and SUNROOF HOUSING REAR DRAIN HOSE REPLACEMENT .
- Connect the electrical connectors to the sunroof module.
- Secure the harness to the sunroof module.
- Adjust the sunroof window. Refer to SUNROOF WINDOW HEIGHT AND OPENING FIT ADJUSTMENT .
- Verify the proper operation of the sunroof before installing the headliner.
- Install the headliner. Refer to HEADLINING TRIM PANEL REPLACEMENT .