Front Toe Adjustment

Position and lock the steering wheel with the vehicle with the wheels in the straight forward position.

Fig 1: Identifying Both Inner Tie Rod Jam Nuts
Courtesy of SUZUKI OF AMERICA CORP.
Loosen both inner tie rod jam nuts.
NOTE: The inner tie rod must rotate freely from the boot seal surface. Do not allow the boot to rotate.
Loosen the inner tie rod seal to boot surface.
Use a wrench on the tie rod flats to increase or decrease the toe angle specifications. Refer to WHEEL ALIGNMENT SPECIFICATIONS .
CAUTION: Refer to FASTENER NOTICE .
Tighten the inner tie rod jam nuts.
Tightening torque

Tighten the jam nuts to 60 N.m (44 lb ft) .
Inspect the toe angle to ensure proper adjustment and adjust as necessary.