Removal Procedure

Remove the compressor from the vehicle. Refer to COMPRESSOR REPLACEMENT .

Fig 1: Identifying Compressor From Vehicle
Courtesy of SUZUKI OF AMERICA CORP.
Use J 37872 to hold the compressor clutch.

Fig 2: Holding Compressor Clutch
Courtesy of SUZUKI OF AMERICA CORP.
Remove the bolt retaining the compressor clutch to the compressor.

Fig 3: Removing Compressor Retaining Bolt
Courtesy of SUZUKI OF AMERICA CORP.
Install GE-47849 to the compressor clutch.
Using GE-47849, remove the compressor clutch from the compressor.
Remove the compressor clutch shims from the compressor shaft.

Fig 4: Removing Snap Ring From Compressor Pulley
Courtesy of SUZUKI OF AMERICA CORP.
Remove the snap ring from the compressor pulley.
Using GE-47850 with J 25031-A, remove the compressor pulley from the compressor.

Fig 5: Removing Clutch Field Coil Connector Bracket Screw From Compressor
Courtesy of SUZUKI OF AMERICA CORP.
Remove the clutch field coil connector bracket screw from the compressor.

Fig 6: Removing Clutch Field Coil Screws From Compressor
Courtesy of SUZUKI OF AMERICA CORP.
Remove the clutch field coil screws from the compressor.

Fig 7: Identifying Clutch Field Coil From Compressor
Courtesy of SUZUKI OF AMERICA CORP.
Remove the clutch field coil from the compressor.