LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2008 >> XL7 Base, AWD >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Heating, Ventilation And A/C >> Repair Instructions >> Blower Case Assembly Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

Fig 1: Identifying Retaining Screws Halves Of Blower Case Assembly
G05470503Courtesy of SUZUKI OF AMERICA CORP.
  1. Install the evaporator core to the blower case assembly.
  2. Assemble the two halves of the blower case assembly.
    CAUTION: Refer to FASTENER NOTICE .
  3. Install the screws to retain the two halves of the blower case assembly.

    Tightening torque 

    Tighten the screws to 1.5 N.m (13 lb in). 

    Fig 2: Identifying Blower Motor Control Module Screws
    G05470504Courtesy of SUZUKI OF AMERICA CORP.
  4. Install the blower motor control module to the blower case assembly.
  5. Install the blower motor control module screws to the blower case assembly.

    Tightening torque 

    Tighten the screws to 1.5 N.m (13 lb in). 

    Fig 3: Identifying Blower Motor Screws
    G05470505Courtesy of SUZUKI OF AMERICA CORP.
  6. Install the blower motor to the blower case assembly.
  7. Install the blower motor screws to the blower case assembly.

    Tightening torque 

    Tighten the screws to 1.5 N.m (13 lb in). 

  8. Install the air inlet assembly. Refer to AIR INLET ASSEMBLY REPLACEMENT .
  9. Install the evaporator case assembly. Refer to AIR CONDITIONING (A/C) EVAPORATOR CASE ASSEMBLY REPLACEMENT .
  10. Install the HVAC module. Refer to HVAC MODULE ASSEMBLY REPLACEMENT .
scientia non olet · About LEMON Manuals