LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2008 >> XL7 Base, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Electrical Devices >> Repair Instructions >> Crankshaft Position Sensor Replacement >> Removal Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal Procedure

Fig 1: Identifying Engine Wiring Harness Electrical Connector
G05469873Courtesy of SUZUKI OF AMERICA CORP.
  1. Raise and support the vehicle. Refer to LIFTING AND JACKING THE VEHICLE .
  2. If equipped with all wheel drive (AWD), remove the transfer case. Refer to TRANSFER CASE ASSEMBLY REPLACEMENT .
  3. Disconnect the engine wiring harness electrical connector (2) from the crankshaft position (CKP) sensor.
    Fig 2: Identifying Crankshaft Position Sensor Bolt
    G05469874Courtesy of SUZUKI OF AMERICA CORP.
  4. Remove the crankshaft sensor bolt.
  5. Remove the crankshaft sensor.
scientia non olet · About LEMON Manuals