Removal Procedure

Fig 1: Identifying Fuel Tank Fresh Air Hose/Pipe

Courtesy of SUZUKI OF AMERICA CORP.

NOTE: The EVAP emissions canister is located under the center of the vehicle. It has 3 EVAP line connections:

Raise and support the vehicle. Refer to LIFTING AND JACKING THE VEHICLE .
CAUTION: Clean all fuel pipe connections and surrounding areas before disconnecting the fuel pipes to avoid contamination of the fuel system.
Disconnect the EVAP canister fresh air hose/pipe from the fuel tank fresh air hose/pipe (2). Refer to PLASTIC COLLAR QUICK CONNECT FITTING SERVICE .
Disconnect the EVAP canister vent hose/pipe from the EVAP canister. Refer to PLASTIC COLLAR QUICK CONNECT FITTING SERVICE .

Fig 2: Identifying EVAP Canister Purge Hose/Pipe And EVAP Canister-To-Underbody Nuts
Courtesy of SUZUKI OF AMERICA CORP.
Disconnect the EVAP canister purge hose/pipe (1) from the EVAP canister.
Remove the EVAP canister-to-underbody nuts (3).
Lower the EVAP canister.

Fig 3: Identifying EVAP Vent Solenoid Electrical Connector And EVAP Canister
Courtesy of SUZUKI OF AMERICA CORP.
Disconnect the EVAP vent solenoid electrical connector (1).
Remove the EVAP canister (4) from the vehicle.