LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2008 >> XL7 Base, AWD >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Repair Instructions >> Ignition Coil Replacement - Bank 1 >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

Fig 1: Identifying Fuel Injector Sight Shield, Engine Wiring Harness Electrical Connector And Ignition Coil
G05469240Courtesy of SUZUKI OF AMERICA CORP.
  1. Remove the fuel injector sight shield. Refer to FUEL INJECTOR SIGHT SHIELD REPLACEMENT .
  2. Disconnect the engine wiring harness electrical connector(s) (1) from the ignition coil(s).
    Fig 2: Identifying Ignition Coil Bolt And Ignition Coil
    G05469241Courtesy of SUZUKI OF AMERICA CORP.
  3. Remove the ignition coil bolt(s).
  4. Remove the ignition coil(s).
scientia non olet · About LEMON Manuals