Component Testing
- Measure for 110-150 ohms between terminals 1 and 2 of the fuel pump relay.
- If the resistance is not within the specified range, replace the fuel pump relay.
- Measure for infinite resistance between the following terminals of the fuel pump relay:
- 3 and 2
- 3 and 5
- 3 and 1
- 1 and 5
- If continuity is detected, replace the fuel pump relay.
- Connect a 15 amp fused jumper wire from the positive terminal of the battery to relay terminal 1. Connect a jumper wire from the negative terminal of the battery to relay terminal 2. Measure for less than 2 ohms between terminals 3 and 5 of the relay.
- If the resistance measures greater than 2 ohms, replace the fuel pump relay.