LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2008 >> XL7 Base, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine General Information And Diagnosis >> Diagnostic Information and Procedures >> DTC P0601-P0604, P0606, P062B, P0167D, P2107, or P2610 >> Circuit/System Verification
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Verification

  1. Ignition ON, observe the DTC information with a scan tool. DTC P0602 or P0606 should not set.
    • If DTC P0602 failed this ignition, program the ECM. If the DTC resets, replace the ECM.
    • If DTC P0606 failed this ignition, clear the DTCs with a scan tool and verify the DTC does not reset. If DTC resets, replace the ECM.
  2. Observe the DTC information with a scan tool. DTC P0601, P0603, P0604, P167D or P2610 should not set.
    • If a DTC failed this ignition, replace the ECM.
  3. Operate the vehicle within the Conditions for Running the DTC to verify the DTC does not reset. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.
scientia non olet · About LEMON Manuals