Circuit/System Verification
- Ignition ON, observe the DTC information with a scan tool. DTC P0642 or P0643 should not be set.
- If a DTC is set, refer to DTC P0641, P0642, P0643, P0651, P0652, P0653, P0697, P0698 OR P0699 .
- Observe the scan tool FTP Sensor voltage parameter. The FTP sensor voltage should be between 0.1-4 volts.
- Operate the vehicle within the Conditions for Running the DTC to verify the DTC does not reset. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.