Circuit/System Verification
- Ignition ON, observe the DTC information with a scan tool. DTC P0698 or P0699 should not be set.
- Clear the DTC Info with a scan tool. Attempt to start the engine, observe the DTC information with a scan tool. DTC P0335, P0336, or P0338 should not set.
- Move related harnesses/connectors of the CKP sensor and verify the engine does not stumble, stall, or change engine speed.
- Operate the vehicle within the Conditions for Running the DTC to verify the DTC does not reset. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.