LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2008 >> XL7 Base, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine General Information And Diagnosis >> Diagnostic Information and Procedures >> DTC P0130 or P0150 >> Circuit/System Testing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Testing

  1. Ignition OFF, disconnect the harness connector at the appropriate HO2S 1.
  2. Ignition ON, verify that the scan tool HO2S 1 parameter is between 350-500 mV.
    • If greater than the specified range, test the signal circuit of the HO2S 1 for a short to the heater circuit. If the circuit/connections test normal, replace the ECM.
  3. If all circuits/connections test normal, replace the appropriate HO2S.
scientia non olet · About LEMON Manuals