LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2008 >> XL7 Base, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine General Information And Diagnosis >> Diagnostic Information and Procedures >> DTC P0111, P0112 or P0113 >> Component Testing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Testing

  1. Ignition OFF, disconnect the harness connector of the IAT sensor.
    NOTE: A thermometer can be used to test the sensor off the vehicle.
  2. Test the IAT sensor by varying the sensor temperature while monitoring the sensor resistance. Compare the readings with the TEMPERATURE VERSUS RESISTANCE - INTAKE AIR TEMPERATURE SENSOR  table and verify that the resistance is within 5 percent of the specification.
    • If the Resistance vs Temperature is not within 5 percent, replace the IAT sensor.