Conditions for Running the DTC

Before the ECM can report DTC P0101 failed, DTCs P0100, P0102, P0103, P0111, P0112, P0113, P0121, P0122, P0123, P0221, P0222, P0223, P0335, P0336, and P0338 must run and pass.
DTC P2176 is not set.
The engine is operating for greater than 1 second.
The MAF sensor signal is greater than 1.39 grams per second.
The ignition voltage is greater than 10 volts.
The engine coolant temperature (ECT) is greater than 10 °C (50 °F).
The ECM detects greater than 150 revolutions of the crankshaft.
DTC P0101 runs continuously once the above conditions are met.