LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2008 >> XL7 Base, AWD >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Repair Instructions >> Coolant Heater Cord Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

Fig 1: Identifying Coolant Heater Cord Clips
G05465618Courtesy of SUZUKI OF AMERICA CORP.
  1. Raise and support the vehicle. Refer to LIFTING AND JACKING THE VEHICLE .
  2. Disconnect the coolant heater power supply cord from the coolant heater (1).
  3. Disconnect the coolant heater cord clip (2) from the coolant heater cord.
  4. Lower the vehicle.
  5. Disconnect the coolant heater cord clips (3, 4) from the engine wiring harness conduit.
    Fig 2: Identifying Coolant Heater Cord Clip From Air Cleaner Assembly
    G05465619Courtesy of SUZUKI OF AMERICA CORP.
  6. Remove the coolant heater cord clip (1) from the air cleaner assembly.
  7. Remove the coolant heater cord clip (2) from the fender panel.
  8. Remove the coolant heater cord from the vehicle.
scientia non olet · About LEMON Manuals