LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2008 >> XL7 Base, AWD >> Repair and Diagnosis >> Electrical >> Starter >> Starting System >> Diagnostic Information and Procedures >> Starter Solenoid Does Not Click >> Component Testing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Testing

  1. Ignition OFF, disconnect the starter relay.
  2. Test for 60-180 ohms between terminals 85 and 86.
    • If the resistance is not within the specified range, replace the relay.
  3. Test for infinite resistance between the following terminals:
    • 30 and 86
    • 30 and 87
    • 30 and 85
    • 85 and 87
      • If not the specified value, replace the relay.
  4. Install a 20A fused jumper wire between terminal 85 and 12 volts. Install a jumper wire between terminal 86 and ground. Test for less than 2.0 ohms between terminals 30 and 87.
    • If greater than the specified range, replace the relay.
scientia non olet · About LEMON Manuals