September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Installation Procedure
Courtesy of SUZUKI OF AMERICA CORP.
- Squeeze the negative battery cable branches together.
NOTE:
Ensure the battery current sensor is installed in the correct direction and location on the negative battery cable.
- Slide the NEW battery current sensor (1) up onto the negative battery cable to the location previously marked during removal.
- Wrap electrical tape around the battery current sensor leg in order to secure the sensor to the negative battery cable.
- Install the negative battery cable clip to the cable to the locations previously marked during removal.
- Install the negative battery cable. Refer to BATTERY NEGATIVE CABLE REPLACEMENT .