LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2008 >> XL7 Base, AWD >> Repair and Diagnosis >> Electrical >> Body Electrical >> Wiring Systems >> Repair Instructions >> Relay Replacement (Attached to Wire Harness) >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

Fig 1: Identifying Relay And Wire Harness Connector
G05471030Courtesy of SUZUKI OF AMERICA CORP.
  1. Locate the relay. Refer to the MASTER ELECTRICAL COMPONENT LIST  to locate the relay in the vehicle.
  2. Remove any fasteners which hold the relay in place.
  3. Remove any connector position assurance (CPA) devices or secondary locks.
    NOTE: Use care when removing a relay in a wiring harness when the relay is secured by fasteners or tape.
  4. Separate the relay (1) from the wire harness connector (2).
scientia non olet · About LEMON Manuals