LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2008 >> XL7 Base, AWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Brakes - Abs >> Diagnostic Information and Procedures >> DTC C0035-C0050 >> Component Testing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Testing

  1. Ignition OFF, disconnect the harness connector at the suspect wheel speed sensor.
  2. Connect a 3A fused jumper wire between B+ and the wheel speed sensor signal terminal A.
  3. Test for 4-8 mA on the low reading between the low reference terminal B and ground when spinning the wheel very slow.
    • If not within the specified range, replace the wheel speed sensor.
  4. Test for 11-16 mA on the high reading between the low reference terminal B and ground when spinning the wheel very slow.
    • If not within the specified range, replace the wheel speed sensor.
scientia non olet · About LEMON Manuals