LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2008 >> XL7 Base, AWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Diagnostic Information and Procedures >> Power Seat Inoperative >> Circuit/System Testing >> Seat Adjuster Switch Circuit Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Seat Adjuster Switch Circuit Test

  1. Ignition OFF, disconnect the harness connector at the seat adjuster switch.
  2. Test for less than 5 ohms between the ground circuit terminal G and ground.
    • If greater than the specified range, test the ground circuit for an open/high resistance.
  3. Ignition ON, verify that a test lamp illuminates between the B+ circuit terminal A and ground.
    • If the test lamp does not illuminate, test the B+ circuit for a short to ground or an open/high resistance.
  4. If all circuits test normal, test or replace the seat adjuster switch.
scientia non olet · About LEMON Manuals