Installation Procedure

Fig 1: Rotating Lock Cylinder In Housing

Courtesy of SUZUKI OF AMERICA CORP.

NOTE: If you are installing a new lock cylinder, refer to KEY AND LOCK CYLINDER CODING .

Position the lock cylinder in the run position. Insert the cylinder into the lock housing.
Rotate the lock cylinder in the housing. Verify proper rotation.
Install the steering column trim covers. Refer to STEERING COLUMN TRIM COVERS REPLACEMENT .
Connect the negative battery cable. Refer to BATTERY NEGATIVE CABLE DISCONNECTION AND CONNECTION .
Enable the SIR system. Refer to SIR DISABLING AND ENABLING .