Removal Procedure
- Remove the rear door outside handle. Refer to REAR SIDE DOOR OUTSIDE HANDLE REPLACEMENT .
- Remove the rear door window run channel assembly. Refer to REAR SIDE DOOR WINDOW CHANNEL REPLACEMENT .
- Remove the rear door lower speaker. Refer to RADIO REAR SIDE DOOR SPEAKER REPLACEMENT .
- Disconnect the electrical connector rosebuds.
- Loosen the 2 rear module bolts.
- Remove the 4 remaining module bolts.
- Remove the 3 latch bolts from the door shut face.
- Disconnect the door harness at the door jamb.
- Remove the window regulator module from the door.