LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2008 >> XL7 Base, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Diagnostic Information and Procedures >> DTC B0835 >> Circuit/System Testing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Testing

  1. Ignition OFF, disconnect the harness connector X1 at the BCM.
  2. Ignition ON, verify that a test lamp does not illuminate between the steering wheel control supply voltage circuit terminal 17 and ground.
    • If the test lamp illuminates, test the steering wheel control supply voltage circuit for a short to voltage.
  3. Ignition OFF, disconnect the harness connector X3 at the BCM.
  4. Ignition ON, verify that a test lamp does not illuminate between the cruise control indicator dimming signal circuit terminal 22 and ground.
    • If the test lamp illuminates, test the cruise control indicator dimming signal circuit for a short to voltage. If the circuit tests normal, replace the steering wheel controls switch assembly - left.
  5. If all circuits test normal, replace the BCM.
scientia non olet · About LEMON Manuals