Component Testing

NOTE: The cruise control ON/OFF switch must be ON in order to properly measure the resistance of the - SET, the + RES, and the Cancel switches.

Steering Wheel Controls Switch - Left

Ignition OFF, remove the inflatable restraint steering wheel module. refer to INFLATABLE RESTRAINT STEERING WHEEL MODULE REPLACEMENT .
Ignition OFF, disconnect the steering wheel controls switch left.
Cruise switch ON, measure the resistance between terminals 1 and 3 at the cruise control switch side of the connector. Individually activate and hold each cruise control function switch and compare the resistance reading to the values on the schematic for the ON/OFF, SET -, the RES +, and the Cancel switches.
- If any of the resistance measurements for the OFF, ON, SET -, RES + and Cancel switches are not within the listed resistance values, replace the steering wheel controls switch - left.

RESISTANCE VALUE SPECIFICATION