LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2008 >> XL7 Base, AWD >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Security And Locks >> Diagnostic Information and Procedures >> Remote Control Door Lock Receiver Scan Tool Information >> Remote Control Lock Receiver Scan Tool Output Controls
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Remote Control Lock Receiver Scan Tool Output Controls

REMOTE CONTROL LOCK RECEIVER SCAN TOOL OUTPUT CONTROLS CHART

Scan Tool Output Control Description
Copy and Paste TPM Information This procedure copies existing setup information from the module.
Invalidate All Fobs This program will erase all key fobs from memory and then begin reprogramming
Next Available Slot This program will add key fobs being programmed to the first open slot available in the module
Program Key Fob 1
  1. Place module in program mode
  2. Repeatedly press and hold the Lock/Unlock buttons on the key fob.
Program Key Fob 2
  1. Place module in program mode
  2. Repeatedly press and hold the Lock/Unlock buttons on the key fob.
Program Key Fob 3
  1. Place module in program mode
  2. Repeatedly press and hold the Lock/Unlock buttons on the key fob.
Program Key Fob 4
  1. Place module in program mode
  2. Repeatedly press and hold the Lock/Unlock buttons on the key fob.
Tire/Type/Pressure Selection
  1. Select load range from list
  2. Select recommended front tire pressure
  3. Select recommended rear tire pressure
scientia non olet · About LEMON Manuals