LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2008 >> Swift + >> Repair and Diagnosis >> Transmission >> Manual Transaxle - D16 >> Repair Instructions - Off Vehicle >> Input Shaft Disassemble >> Disassemble
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Input Shaft Disassemble: Disassemble

    Fig 1: Detent Screw & Input Driveshaft
    GM1251691Courtesy of GENERAL MOTORS CORP.
  1. Remove the detent screw at the end of the input driveshaft.
    2. Fig 2: Snap Ring & Gear Cluster
    GM1251692Courtesy of GENERAL MOTORS CORP.
  2. Remove the snap ring at the base of the gear cluster.
    3. Fig 3: Input Driveshaft Cluster Gear & J 22912-01
    GM1251693Courtesy of GENERAL MOTORS CORP.
  3. Press the input driveshaft from the input shaft cluster gear using the J 22912-B  (1).
    4. Fig 4: Cluster Shaft Bearing & J 22912-01
    GM1251694Courtesy of GENERAL MOTORS CORP.
  4. Remove the cluster shaft bearing from the input shaft gear cluster using theJ 22912-B  (1).
scientia non olet · About LEMON Manuals