LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2008 >> Swift + >> Repair and Diagnosis >> Steering >> Steering Wheel & Steering Column >> Repair Instructions >> Turn Signal Multifunction Switch Replacement (Notchback) >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: Steering Column Panels
    GM1715979Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Remove the lower steering column cover panel screws (6, 7, 8).
  3. Turn the steering wheel in order to access the upper steering column cover panel screws (3, 4). Remove the upper steering column cover panel screws.
  4. Remove the upper steering column cover panel (1) and the lower steering column cover panel (5).
    5. Fig 2: Turn Signal Switch
    GM1715990Courtesy of GENERAL MOTORS CORP.
  5. Remove the turn signal switch by pushing in on the tabs (2, 3) on either side of the switch housing.
  6. Disconnect the electrical connectors (1, 4) from the turn signal switch.
scientia non olet · About LEMON Manuals