LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2008 >> Swift + >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Heating, Ventilation, And Air Conditioning >> Repair Instructions >> Heater Hoses Replacement (Notchback) >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: Two Heater Hose Spring Clamps At Fire Wall
    GM1895028Courtesy of GENERAL MOTORS CORP.
  1. Partially drain the cooling system.
  2. Compress and slide rearward the two heater hose spring clamps at the fire wall.
    3. Fig 2: Heater Hoses At Tube
    GM1895030Courtesy of GENERAL MOTORS CORP.
  3. Gently twist the hose from the left to the right and back again to loosen the bond between the hose and the tube.
  4. Remove the end of the hose from the tube.
  5. Repeat Steps 3 and 4 with the other hose.
  6. Compress the heater hose spring clamp on the inlet coolant line and slide the clamp rearward.
  7. Remove the hose from the vehicle.
  8. Compress the heater hose spring clamp at the connection below the intake manifold and slide the clamp rearward.
  9. Remove hose from the vehicle.
scientia non olet · About LEMON Manuals