Removal Procedure
- Disconnect the negative battery cable.
- Remove the audio system. Radio Replacement (Notchback) or Radio Replacement (Hatchback) .
- Remove the lower left and right controller retaining screws.
- Remove the controller by pulling it out to provide clearance for the removal of the cable.
- Disconnect the mechanical control cables by gently prying off the cable eyelet and unsnapping the cable housing from the mechanical slide.
- Disconnect the electrical connectors.
CAUTION:
Refer to Battery Disconnect Caution
.
IMPORTANT:
Note the location of the cables and the housings to facilitate their reinstallation.