LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2008 >> Swift + >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> HVAC System - Automatic >> Repair Instructions >> Sun Load Sensor Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: Sun Load Sensor
    GM1817432Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Battery Disconnect Caution .
  1. Disconnect the negative battery cable.
  2. Gently pry up on the sun load sensor to remove it.
  3. Secure the electrical connector to prevent it from falling beneath the dash.
  4. Disconnect the electrical connector and remove the sun load sensor.
scientia non olet · About LEMON Manuals