Vehicles with DIC (& Turn Signal Lever Controls)
- Turn the ignition to ON/RUN with the engine off.
- Press the DIC MENU button on the turn signal lever to enter the Vehicle Information Menu. Use the thumbwheel to scroll through the menu items until you reach REMAINING OIL LIFE. See Fig 1.NOTE: On vehicles with an Uplevel DIC, the controls are at the right-hand side of the steering wheel.
- Press the SET/CLR button (on some models, the check-symbol button) while the oil life display is active. After a few seconds, there will be a single chime (on some models) and the oil life will be reset to 100%
- Turn the ignition to LOCK/OFF.
The system is reset when the CHANGE OIL message is off and the REMAINING OIL LIFE 100% message is displayed.
NOTE:
If the CHANGE OIL message comes back on or Code 82 DIC message comes on when the vehicle is started, the engine oil life system has not been reset. Repeat the procedure.