Conditions for Running the DTC

DTCs P0016, P0106, P0107, P0108, P0117, P0118, P0122, P0123, P0315, P0335, P0336, P0337, and P0502 are not set.
Engine speed is between 600-6,500 RPM.
The ignition 1 voltage is between 11-16 volts.
The engine coolant temperature (ECT) is between -7 and +120°C (+19 and +248°F).
The A/C compressor clutch is not changing states.
The fuel tank level is more than 15 percent.
The ECM is not in fuel cut-off or decel fuel cut-off mode.
The ECM is not receiving a rough road signal.
The throttle angle is steady within 10 percent.
The throttle angle is less than 4 percent when the vehicle speed is more than 10 km/h (6 mph).
The transmission is not changing gears.
The antilock brake system (ABS) and the traction control system (TCS), if equipped, is not active.
The DTCs run continuously when the above conditions are met.