Conditions for Running the DTC

P0135

• DTCs P0031, P0032, P0106, P0107, P0117, and P0118, are not set.
• The HO2S 1 heater pulse width modulation (PWM) is greater than 0.05 percent.
• The engine has been running for 60 seconds.
• The ignition 1 voltage is greater than 10 volts.
• The manifold absolute pressure (MAP) is less than 65 kPa.
• The DTC runs continuously when the above conditions are met for 375 milliseconds.

P0141

• The HO2S 2 heater pulse width modulation (PWM) is greater than 0.05 percent.
• The engine has been running for 30 seconds.
• The ignition 1 voltage is greater than 10 volts.
• The DTC runs continuously when the above conditions are met for 375 milliseconds.