Conditions for Running the DTC

P0107

• DTCs P0122 and P0123 are not set.
• The TP sensor is greater than or equal to 0 percent while the engine speed is less than 1,000 RPM.

  OR

• The TP sensor is greater than 5 percent while the engine speed is greater than 1,000 RPM.
• The ignition 1 voltage is greater than 11 volts.
• The DTC runs continuously when the above conditions are met.

P0108

• DTCs P0122 and P0123 are not set.
• The engine has been running for greater than 10 seconds.
• The TP sensor is less than 15 percent while the engine speed is less than 2,500 RPM.

  OR

• The TP sensor is less than 35 percent while the engine speed is greater than 2,500 RPM.
• The DTC runs continuously when the above conditions are met.