LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2008 >> Swift + >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Repair Instructions >> Coolant Heater Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: View Of Coolant Heater And Seal
    GM785734Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  1. Install the seal to the coolant heater.
  2. Install the coolant heater in to the engine block.

    Tighten:  Tighten the coolant heater to 60 N.m (44 lb ft).

  3. Connect the coolant heater power supply cord to the coolant heater.
  4. Fill the cooling system. Refer to Cooling System Draining and Filling .
scientia non olet · About LEMON Manuals