Installation Procedure

Fig 1: View Of Engine Mounting Lower Bracket Mounting Bolts, Lower Bracket, And Reaction Rod Bolt And Nut

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice .

Install the engine mounting lower bracket mounting bolts (1).
Tighten: Tighten the engine mounting lower bracket bolts to 41 N.m (30 lb ft).
Install the engine mount reaction rod mounting bolt and nut (3).
Tighten: Tighten the engine mount lower bracket, attaching reaction rod bolt and nut to 83 N.m (61 lb ft).

Fig 2: View Of Generator-Adjusting Bolt And Lower Bracket-To-Generator Bolt And Nut

Courtesy of GENERAL MOTORS CORP.

Install the generator-adjusting bolt (1). Leave loose at this time.
Install the generator lower bracket bolt and nut (2). Leave loose at this point.
Install the generator drive belt.
Adjust the generator so the drive belt is tight.
Tighten:
- Tighten the generator lower bracket bolt and nut to 28 N.m (21 lb ft).
- Tighten the generator-adjusting bolt to 7 N.m (62 lb in).

Fig 3: View Of Generator Battery Lead Connector Nut And Generator Harness Connector

Courtesy of GENERAL MOTORS CORP.

Connect the harness connector to the back of the generator (2).
Connect the generator battery lead and install the nut (1).
Tighten: Tighten the generator battery lead nut to 15 N.m (11 lb ft).
Inspect the generator drive belt tension.