LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2008 >> Swift + >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Controls And Fuel - 1.6L - Introduction (2 Of 2) >> Repair Instructions >> Heated Oxygen Sensor 1 Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: Identifying Front Heated Oxygen Sensor Connector
    GM1241561Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Battery Disconnect Caution .
  1. Disconnect the negative battery cable.
    2. NOTE: Refer to Heated Oxygen and Oxygen Sensor Notice .
  2. Disconnect the front heated oxygen sensor (HO2S1) connector.
    3. NOTE: Remove oxygen sensors with the engine temperature above 48°C (120°F). Otherwise the oxygen sensors may be difficult to remove.
  3. Carefully remove the HO2S1 from the exhaust manifold.
scientia non olet · About LEMON Manuals