LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2008 >> Swift + >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Controls And Fuel - 1.6L - Introduction (2 Of 2) >> Repair Instructions >> Camshaft Position Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Disconnecting/Connecting CMP Sensor Electrical Connector And Bolt
    GM1289481Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  1. Install the CMP sensor and bolt.

    Tighten:  Tighten the CMP sensor bolts to 7 N.m (62 lb in).

    2. Fig 2: Identifying Cover Screws
    GM1371851Courtesy of GENERAL MOTORS CORP.
  2. Install the timing bolt front cover. Refer to Timing Belt Replacement .
  3. Connect the CMP sensor electrical connector.
  4. Install the engine cover.
  5. Connect the negative battery cable.
scientia non olet · About LEMON Manuals