LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2008 >> Swift + >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Controls And Fuel - 1.6L - Introduction (2 Of 2) >> Repair Instructions >> Air Cleaner Inlet Duct Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    IMPORTANT: The intake air temperature sensor is no longer replaced as a seperate service item. If the intake air temperature sensor is faulty, replacement of the entire air cleaner inlet duct will be necessary.
  1. Turn OFF the ignition.
  2. Disconnect the electrical connector from the intake air temperature (IAT) sensor.
  3. Disconnect the breather tube from the air cleaner intake duct.
    4. Fig 1: Air Cleaner Intake Duct
    GM1916113Courtesy of GENERAL MOTORS CORP.
  4. Loosen the clamps securing the air cleaner intake duct.
  5. Remove air cleaner intake duct.
scientia non olet · About LEMON Manuals